• Chicago: 800-323-0740
Precision Steel Warehouse, Inc.
Your Flat Rolled Steel Specialist

Quarter Hard Temper Brass Strip

Quarter Hard Brass Strip (analysis above) has been cold reduced (By one B & S gage number) 10.9% from its annealed condition to a tensile strength of approximately 54,000 PSI and elongation in 2" at 43%. It has excellent cold forming qualities and is suitable for moderate drawing or forming and in general where dead soft quality would be objectionable and some slight stiffness is required. It is used for rolled formed and drawn parts, lamp fixtures, etc.


In Coils or Lengths for Blanking, Stamping and Forming

SAE CA260
Cu. 70% Zn. 30%
ROCKWELL 30T 43/60 approx.


The minimum order for PSW products is $300. 

Quarter Hard Temper Brass Tolerance Data
View More »
Thickness (in)
inches / mm
Max Width (in)
inches / mm
Weight
Lbs per Feet/ Kilos. per m2
Rockwell Hardness
0.01 / 0.254 24 / 609.6 0.4440 / 2.1681 details Get a Quote »
0.0126 / 0.32004 24 / 609.6 0.5590 / 2.7296 details Get a Quote »
0.0159 / 0.40386 24 / 609.6 0.7060 / 3.4474 details Get a Quote »
0.0179 / 0.45466 24 / 609.6 0.7940 / 3.8771 details Get a Quote »
0.0201 / 0.51054 24 / 609.6 0.8920 / 4.3556 details Get a Quote »
0.0253 / 0.64262 24 / 609.6 1.1220 / 5.4787 details Get a Quote »
0.032 / 0.8128 24 / 609.6 1.4190 / 6.929 details Get a Quote »
0.0403 / 1.02362 24 / 609.6 1.7880 / 8.7308 details Get a Quote »
0.0453 / 1.15062 24 / 609.6 2.0090 / 9.8099 details Get a Quote »
0.0508 / 1.29032 24 / 609.6 2.2530 / 11.0014 details Get a Quote »
0.0641 / 1.62814 24 / 609.6 2.8440 / 13.8873 details Get a Quote »

11 Item(s)

Click here to submit a Request for Quote
or call us today at 800-323-0740