ELIMINATES BANDS
FROM COILS
22 cuts of slit material going through over-arm dividers prior
winding on Mandrel. Saves you time and time is money.
TIGHT UNIFORM COILS
Wound on slitter Mandrel. Results in more consistency in large
coils.
NO PAPER
IN COILS
Precision Pak being removed from slitting Mandrel as one solid
group of coils.
NO DAMAGED EDGES Precision Stak Pak™ before band-ing.
Only two-sided tape on the inside and outside wraps of each
coil hold material together. Less waste of unusable material.
(More money saved.)
NO WOODEN SPACERS
One coil separated from the Pak to show
tightness of an individual coil. You can store more material
in a smaller space. (More dollar savings.)
NO BUCKLE
DAMAGE
Coils do not collapse or telescope.
LESS HANDLING
Only two bands needed per skid to hold Pak together. Save hours
of handling time with less risk of damage to material.
LESS DOWN TIME Finished Precision Stat Pak' skid. ready for
packaging and shipment. Less down time on your equipment due
to faster set-up time. (More money saved.)
**GUIDELINE FOR MACHINE LIMITATIONS:
Width 1/4" to 1 1/2"
Gauge .005 to .035,
Coil Size 6" to 16" inside diameter
25"to 30" outsidediameter or 100 lb. coils
Illinois 3500 North
Wolf Road | Franklin Park, IL 60131 Toll Free: 800-323-0740 | Phone: 847-455-7000 | Fax: 847-455-1341 North Carolina
2027 Gateway Blvd. | Charlotte,
NC 28208-2741
Phone: 800-438-5646 | Fax: 704-393-3312
[ Terms & Conditions of Use ] Copyright
1996-2003 Precision Steel Warehouse, Inc. All Rights Reserved.
This site is protected by copyright and trademark laws under U.S. and International
trademarks.
Download
the PDF Data Sheet.
