Tolerance Data

Stainless & Heat Resisting Cold Rolled Strip Steels

Thickness Tolerances
Coils and Cut Lengths

Specified Thickness (inch)	Thickness Tolerances - Inch For the thickness and widths given. Width (inch)
Specified Thickness (inch)	3/16 to 6 Incl.	Over 6 to 12 Incl.	Over 12 to 24 Excl.
.005 to .010 Incl.	10%	10%	10%
Over .010 to .011 Incl.	.0015	.0015	.0015
Over .011 to .013 Incl.	.0015	.0015	.002
Over .013 to .017 Incl.	.0015	.002	.002
Over .017 to .020 Incl.	.0015	.002	.0025
Over .020 to .029 Incl.	.002	.0025	.0025
Over .029 to .035 Incl.	.002	.003	.003
Over .035 to .050 Incl.	.0025	.0035	.0035
Over .050 to .069 Incl.	.003	.0035	.0035
Over .069 to .100 Incl.	.003	.004	.005
Over .100 to .125 Incl.	.004	.0045	.005
Over .125 to .161 Incl.	.0045	.0045	.005
Over .161 to 3/16 Excl.	.005	.005	.006

Note 1: Thickness measurements are taken at least 3/8 inch in from edge of the strip, except that on widths less than 1 inch the tolerances are applicable for measurements at all locatons.

Note 2: Above tolerances include crown.