Coil weight 20,000 lbs. maximum 16" to 24" I.D. Hot Rolled Pickled or Cold Rolled. Sizes narrower than those shown can be slit with no guaran-tee as to camber and burr. In some instances, heavier sizes can be slit. Refer to office on Annealed Spring Steel heavier than shown.
Flat sheets from coils to exact blank sizes.
Thickness range .015 to .109 inc'l.
Widths and Lengths from 1 "x 5" to 48" x 168". |
High Carbon Stainless and Alloy Steel 1/8" max. Sheared Strips 1/8" and heavier. Low Carbon Steel 1" to 1-1/2" may need flattening after shearing. This may have camber as a result. |
Deburred Edge only on all products. |
All Tempers Low Carbon Steel, Aluminum, Copper Alloys, Soft High Carbon, and Stainless. Oscillated Coils 4-1/2" Face 16" I.D. 1000 lb. max. Ribbon Wound Coils 40" max. O.D. 16" I.D. Round Edge only. |
Thickness Limitation .010 min. - .070 max.
Edge: .010 - .030 Rounded Edge .031 - .050
Good Safety Edge .051 - .070
Safety Edge Squared |
Flatness not guaranteed on 1/4 Hard, Half Hard, 3/4 Hard, or Full Hard Stainless Steel, Spring Temper Phosphor Bronze and MartINsite®. Tempered Spring Steel is made flat in coil and flattening and cutting to length does not improve its flatness. Sizes 3/8" to 3" .084 to .125 may be flat-tened and cut to length on the Edge Rolling Machine. |
