17/7-PH Stainless Steel Condition C
17/7-PH Condition C (Hard Rolled Temper 17/7 Cr - Ni 1 % AL) Precipitation Hardenable Stainless Steel Strip. This alloy provides design and production advantages possessed by none of the standard stainless steels. It can be formed in about the same way as hard rolled Type 301 with the added advantage of subsequent heat treatment for further hardening purposes and has minimum distortion on heat treatment. Its corrosion resistance is superior to that of the straight chromium grades. This temper conforms to the SAE Aeronautical Material specification AMS 5529. Condition C has a tensile strength of 200,000 PSI minimum, a yield strength of 175,000 PSI minimum and elongation in 2 inches of 1% minimum.
FLATNESS - Because of the wide range of widths and thicknesses and the variety of tempers produced in coils and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled stainless steel strip cannot be guaranteed.
C .09 Max.
Mn 1.00 Max.
Si 1.00 Max.
P .040 Max.
S .030 Max.
The minimum order for PSW products is $400.
View More »
inches / mm
|Max Width (in)
inches / mm
Lbs per Feet/ Kilos. per m2
|0.005 / 0.127||24 / 609.6||0.2088 / 1.0196||details|
|0.008 / 0.2032||24 / 609.6||0.3342 / 1.6319||details|
|0.01 / 0.254||36 / 914.4||0.4176 / 2.0391||details|
|0.012 / 0.3048||36 / 914.4||0.5011 / 2.4469||details|
|0.015 / 0.381||36 / 914.4||0.6264 / 3.0587||details|
|0.018 / 0.4572||36 / 914.4||0.7517 / 3.6706||details|
|0.02 / 0.508||36 / 914.4||0.8352 / 4.0783||details|
|0.025 / 0.635||36 / 914.4||1.0440 / 5.0979||details|
|0.031 / 0.7874||36 / 914.4||1.2946 / 6.3215||details|
|0.035 / 0.889||36 / 914.4||1.4616 / 7.137||details|
|0.05 / 1.27||36 / 914.4||2.0880 / 10.1957||details|
|0.062 / 1.5748||36 / 914.4||2.5891 / 12.6426||details|
Click here to submit a Request for Quote
or call us today at 800-323-0740