301 Stainless Steel Full Hard
Full Hard Cold Rolled - Type 301 - (chrome-nickel) Stainless Steel permits cold working to the ideal combination of mechanical properties desired for springs.
The minimum order for PSW coil products is $400.
Full Hard Cold Rolled - Type 301 - (chrome-nickel) Stainless Steel permits cold working to the ideal combination of mechanical properties desired for springs. Its unique combination of hardness and toughness makes for better forming quality in this Full Hard Temper plus increased fatigue life in the finished spring. In this temper, it develops an approximate minimum tensile strength of 185,000 PSI and 140,000 PSI yield strength with elongation in 2 inches at 8% to 9% minimum.
Precision Steel carries an inventory of 301 full hard tempered stainless steel in sheets and coils. Meets AMS 5519 standard for the aerospace industry. Full tempered 301 stainless steel is commonly used for parts that require moderate drawing or forming and high strength.
Flatness - Because of the wide range of widths and thicknesses and the variety of tempers produced in coils and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled stainless steel strip cannot be guaranteed.
Complete Facilities For Slitting - Edging - Length Cutting – Blanking
- AlSl 301
- AMS 5519
- ASTM A 666
- C .15 Max.
- Mn 2.00 Max.
- Si .750 Max.
- P .040 Max.
- S .030 Max.
- Cr 16.00/18.00
- Ni 6.00/8.00