302 Stainless Steel 3/4 Hard
- AlSl 302 Chemistry Only
- AMS 5905 Chemistry Only
- C .15 Max.
- Mn 2.00 Max.
- Si .750 Max.
- P .040 Max.
- S .030 Max.
- Cr 17.00/19.00
- Ni 8.00/10.00
THREE QUARTER HARD Cold Rolled Type 302 (18/8 chrome-nickel) Stainless Steel Strip at rockwell C-35/40 approx. Due to demand this temper is stocked alongside of its 3/4 Hard counterpart in Type 301. Both have their place in the Austenitic family of hard rolled tempers. The 302 is characterized as possessing somewhat less hardness, toughness, elongation and spring back but easier to form. Also Type 302 possesses greater heat and corrosion resistance. Your choice will depend on the degree of forming required to do the job at hand or to the specifications. If you have temper problems, we invite your inquiries. We will be happy to help you select the proper material for your needs. Note - The AISI Stainless Manual does not show tensile, yield or elongation for Type 302.
FLATNESS - Because of the wide range of widths and thicknesses and the variety of tempers produced in coils and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled stainless steel strip cannot be guaranteed.
Complete Facilities For Slitting - Edging - Shearing Length Cutting - Blanking and Deburring
The minimum order for PSW products is $300.
View More »
inches / mm
|Max Width (in)
inches / mm
Lbs per Feet/ Kilos. per m2
|0.015 / 0.381||24 / 609.6||0.6264 / 3.0587||details|
|0.02 / 0.508||24 / 609.6||0.8352 / 4.0783||details|
|0.025 / 0.635||24 / 609.6||1.0440 / 5.0979||details|
|0.031 / 0.7874||24 / 609.6||1.2946 / 6.3215||details|
Click here to submit a Request for Quote
or call us today at 800-323-0740