AISI 1065 SAE

The minimum order for PSW coil products is $400.

AISI 1065 carbon steel is a high-carbon steel, which has high tensile strength and heat treatable. The following chart will give an overview of AISI 1065 carbon steel in detail.

1065 Steel is plain carbon steel containing 0.60 - 0.70 wt% of carbon.

Formed Springs Requiring Heat Treatment
AISI - 1065 - SAE
Normal Temp 1550° - 1650° F.
Anneal Temp 1400° - 1500° F.
Hard Temp 1475° - 1550° F.
Oil Quench Rc 62
Rockwell Drawing Temp. *
AISI - 1065 - SAE
400° F 600° F 700° F 800° F 900° F 1000° F 1100° F 1200° F
Rc 57 Rc 50 Rc 46 Rc 42 Rc 39 Rc 35 Rc 28 Rc 22
Tensile PSI Drawing Temp. *
AISI - 1065 - SAE
400° F 600° F 700° F 800° F 900° F 1000° F 1100° F 1200° F
295,000 240,000 215,000 190,000 180,000 160,000 125,000 112,000

* The proper drawing range and time cycles should be determined by experiment calculated to develop those properties best suited for intended end usage.

Special Note - These temperature ranges and their resultant values are given as information only and not to be followed without experimentation. However, as these steels are held to close uniformity tolerances little difficulty should be experienced.